codehaus


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[openstack-dev][kuryr] Not working in ARM64 (as Node)


We're using 2.9.5 on the x86_64 gate and that works fine. I'm not sure
if downgrading could help. This is a Neutron issue and I don't have
much experience on such a low level. You can try asking on IRC, e.g. on
#openstack-neutron.

On Thu, 2020-02-13 at 06:52 +0000, VeeraReddy wrote:
> Thanks mdulko,
> Issue is in openvswitch, iam getting following error in switchd logs
> ./ovs-vswitchd.log:2020-02-12T12:21:18.177Z|00493|connmgr|INFO|br-int<->unix#50: sending NXBAC_CT_DATAPATH_SUPPORT error reply to OFPT_BUNDLE_ADD_MESSAGE message
> 
> Do we need to patch openvswitch to support above flow?
> 
> My ovs version
> 
> [root at node-2088 ~]# ovs-vsctl --version
> ovs-vsctl (Open vSwitch) 2.11.0
> DB Schema 7.16.1
> 
> 
> 
> Regards,
> Veera.
> 
> 
> On Wednesday, 12 February, 2020, 05:37:31 pm IST, <mdulko at redhat.com> wrote:
> 
> 
> The controller logs are from an hour later than the CNI one. The issues
> seems not to be present.
> 
> Isn't your controller still restarting? If so try to use -p option on
> `kubectl logs` to get logs from previous run.
> 
> On Wed, 2020-02-12 at 09:38 +0000, VeeraReddy wrote:
> > Hi Mdulko,
> > Below are log files:
> > 
> > Controller Log:http://paste.openstack.org/show/789457/
> > cni : http://paste.openstack.org/show/789456/
> > kubelet : http://paste.openstack.org/show/789453/
> > 
> > Unable to create kubelet interface in node, so not able to reach cluster (i.e 10.0.0.129)
> > 
> > Please let me know the issue
> > 
> > 
> > 
> > Regards,
> > Veera.
> > 
> > 
> > On Tuesday, 11 February, 2020, 03:29:10 pm IST, <mdulko at redhat.com> wrote:
> > 
> > 
> > Hi,
> > 
> > So from this run you need the kuryr-controller logs. Apparently the pod
> > never got annotated with an information about the VIF.
> > 
> > Thanks,
> > MichaÅ?
> > 
> > On Fri, 2020-02-07 at 05:14 +0000, VeeraReddy wrote:
> > > Hi mdulko,
> > > Thanks for your support.
> > > 
> > > As you mention i removed readinessProbe and
> > > livenessProbe from Kuryr pod definitions. Still i am facing issue , unable to create pod. 
> > > 
> > > 
> > > 
> > > 
> > > Attached kubelet and kuryr-cni logs.
> > > 
> > > 
> > > 
> > > Regards,
> > > Veera.
> > > 
> > > 
> > > On Thursday, 6 February, 2020, 05:19:12 pm IST, <mdulko at redhat.com> wrote:
> > > 
> > > 
> > > Hm, nothing too troubling there too, besides Kubernetes not answering
> > > on /healthz endpoint. Are those full logs, including the moment you
> > > tried spawning a container there? It seems like you only pasted the
> > > fragments with tracebacks regarding failures to read /healthz endpoint
> > > of kube-apiserver. That is another problem you should investigate -
> > > that causes Kuryr pods to restart.
> > > 
> > > At first I'd disable the healthchecks (remove readinessProbe and
> > > livenessProbe from Kuryr pod definitions) and try to get fresh set of
> > > logs.
> > > 
> > > On Thu, 2020-02-06 at 10:46 +0000, VeeraReddy wrote:
> > > > Hi mdulko,
> > > > Please find kuryr-cni logs
> > > > http://paste.openstack.org/show/789209/
> > > > 
> > > > 
> > > > Regards,
> > > > Veera.
> > > > 
> > > > 
> > > > On Thursday, 6 February, 2020, 04:08:35 pm IST, <mdulko at redhat.com> wrote:
> > > > 
> > > > 
> > > > Hi,
> > > > 
> > > > The logs you provided doesn't seem to indicate any issues. Please
> > > > provide logs of kuryr-daemon (kuryr-cni pod).
> > > > 
> > > > Thanks,
> > > > MichaÅ?
> > > > 
> > > > On Thu, 2020-02-06 at 07:09 +0000, VeeraReddy wrote:
> > > > > Hi,
> > > > > I am trying to run kubelet in arm64 platform
> > > > > 1.    Generated kuryr-cni successfullly. using kur-cni Dockerfile
> > > > > 2.    Generated kuryr-cni-arm64 container.
> > > > > 3.    my kube-kuryr-arm64.yml (http://paste.openstack.org/show/789208/)
> > > > > 
> > > > > My master node in x86 installed successfully using devstack
> > > > > 
> > > > > While running kubelet in arm platform , not able to create kubelet interface (kubelet logs: http://paste.openstack.org/show/789206/)
> > > > > 
> > > > > COntroller logs: http://paste.openstack.org/show/789209/
> > > > > 
> > > > > Please help me to fix the issue
> > > > > 
> > > > > Veera.
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > Regards,
> > > > > Veera.
> > > > 
> > > > 
> > > 
> > > 
> > 
> > 
> 
>