codehaus


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[quuens] neutron vxlan to vxlan


Thanks Roman. I think secondo way you suggested is better than first.
Ignazio


Il Sab 8 Feb 2020, 18:29 CHANU ROMAIN <romain.chanu at univ-lyon1.fr> ha
scritto:

> Hello,
>
>
> You could do it if you use linuxbridge driver, arp_responder has to be set
> to false. VMware's VNI has to be set in multicast mode, then if OS et NSX
> use same multicast IP VM should be able to communicate.
>
>
> If your ESX et OS's hypervisors are not conencted to same network, you
> have to enable PIM in your router.
>
>
> Anyway this configuration is a bit dirty and you should look a proper way
> to make it works over L3. A VPN inside each subnets with static routes is
> cleaner and less risky.
>
>
> Best regards,
>
> Romain
>
>
>
> ------------------------------
> *From:* Ignazio Cassano <ignaziocassano at gmail.com>
> *Sent:* Saturday, February 8, 2020 3:59 PM
> *To:* openstack-discuss
> *Subject:* [quuens] neutron vxlan to vxlan
>
> Hello, I have an openstack installation and a vcenter installation with
> nsxv.
> Vcenter is not under openstack
> Any solution for vxlan to vxlan communication between them?
> Regards
> Ignazio
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20200208/66d6ac09/attachment-0001.html>